How to Install Filters on Your Aquavoss AV-2 - Hot SideUpdated 8 days ago

Keeping your filters properly installed is key to maintaining clean water and ensuring your system runs efficiently. This quick guide will walk you through how to install your filters correctly.

🎥 Video Guide

If you prefer to follow along visually, you can watch the full walkthrough here:

🧰 Before You Begin

• Make sure your unit is powered off (required)
• Locate your filter and filter housing
• Confirm you're using the correct filters for your unit

🔧 Step-by-Step Instructions

1. Locate the Filter Housing

Open the equipment compartment area on your AV-2. This is where your filters will be installed.

2. Remove the Filter Lid Ring and Lid

Your unit has a cap or lid covering the filter opening, remove it to access the housing.

3. Insert the Filter

Take your filter and gently place it into the housing.

• Make sure it is aligned properly
• Do not force it, it should slide in smoothly

4. Reinstall the Lid

You unit has a filter cap or cover and ring to secure it, place them back on securely.

✅ Final Check

• Filters are seated evenly
• No cross-threading
• Lids/caps are secure
• Unit is ready to run

💡 Pro Tips

• Keep it snug, not tight — overtightening can make removal difficult later
• Check regularly — clean your filters every few weeks depending on usage
• Replace as needed — worn filters reduce performance and water quality

⚠️ Common Mistakes to Avoid

• Forcing the filter into place
• Cross-threading when installing filter ring that hold the cap secure
• Forgetting to reinstall the filter cap
• Running the unit without filters installed

Need Help?

If anything doesn’t feel right during installation, don’t hesitate to reach out to our support team — we’re here to help.